Skip to content
Defence Access

Market access

How electronics and engineering suppliers approach defence primes and integrators

What a defence prime contractor is, which companies receive most of MOD's spending, and a practical method for component, electronics and engineering suppliers: find the platforms that use your category, the UK sites that build them, the people who own that spend, and what they check before they will talk to you.

By Dane Cross Updated 8 min read

If you make cable assemblies, wiring harnesses, enclosures, electronic modules or precision parts, your defence customer is almost never “the MOD”. It is a company assembling a vehicle, ship, aircraft or missile, or one of its tier-one suppliers, at a specific UK site, buying through a specific team. This guide sets out a method for finding those companies and approaching them credibly. It uses public examples checked on 7 October 2026, and MOD’s supplier figures published on 1 October 2026. None of the companies named is a client of Defence Access, and naming them implies no relationship.

What is a defence prime contractor?

A prime contractor, usually shortened to “prime”, is the company that holds the main contract with the Ministry of Defence for a complete platform, system or service, and answers to MOD for delivering it. A prime builds or integrates the whole and buys much of the content from its supply chain: tier-one suppliers sit directly beneath it, and they buy in turn from lower tiers. Many primes are also systems integrators, and the same company can be a prime on one programme and a supplier on another.

MOD’s money is concentrated in a few of these companies. Its trade, industry and contracts statistics, published on 1 October 2026, show that ten companies received 40% of MOD’s procurement spending in 2025/26:

Company MOD spending in 2025/26
BAE Systems £7,258m, 16.5% of the total
Babcock £3,288m
Rolls-Royce £1,562m
QinetiQ £1,114m
Airbus £834m
Leonardo £778m
Thales £736m
Serco £726m
Leidos £646m
Boeing £597m

Not all of them build platforms: Leidos and Serco mainly provide services. Spending with joint ventures is counted under their owners, so MBDA UK, the missile maker, appears within the figures for BAE Systems, Airbus and Leonardo. The practical point for a component supplier is that most defence demand for parts reaches you through these companies, the integrators that work for them and their tier-one suppliers, not through a contract with MOD itself.

Start from the platform, not from “defence”

“Defence” is too broad to approach. A platform is not. Every vehicle, ship, aircraft and missile programme has an integrator, a UK site where it is built, and a supply chain that buys parts like yours. Public announcements tell you where the volume is.

Platform or programme Integrator and UK site What the public record says Why the category matters
Challenger 3 and Boxer Rheinmetall BAE Systems Land, Telford £5bn for 148 Challenger 3 tanks and 623 Boxer vehicles, planned to be in service by the end of 2030 (GOV.UK, January 2025) RBSL’s £10m, ten-year contract with TT Electronics covers cable assemblies and cable harness assemblies for Boxer
Boxer KNDS UK, Stockport Fabrication of the armoured structures, plus assembly, integration and test of complete vehicles (KNDS UK) Final assembly and integration is where harnesses and cable assemblies are fitted (our inference)
AJAX General Dynamics UK, Merthyr Tydfil Initial operating capability reached; 589 vehicles; more than 230 UK companies in the programme (GOV.UK, November 2025) Vehicle electrical systems and electronics (our inference)
Lightweight Multirole Missile Thales UK, Belfast More than 5,000 missiles under a £1.6bn deal; production to treble, with companies in Thales’s UK supply chain benefiting (GOV.UK, March 2025) Missile and launcher assemblies use harnesses and enclosures (our inference)
New Medium Helicopter (AW149) Leonardo UK, Yeovil £1bn for 23 helicopters; nearly 70 UK companies in the supply chain (GOV.UK, March 2026) Airframe wiring and avionics enclosures (our inference)
Type 31 frigates Babcock, Rosyth HMS Active rolled out and steel cut for HMS Bulldog; about £200m invested at Rosyth; 1,250 supply-chain jobs (GOV.UK, February 2026) Warship electrical outfitting, equipment racks and enclosures (our inference)
Missiles MBDA UK, Bolton £200m investment and 700 jobs; the Bolton footprint to more than double by 2028 (GOV.UK, May 2025) Missile electronics and harnesses (our inference)

Two lessons come out of a table like this. First, the work concentrates at a small number of UK sites, which makes a focused approach possible. Second, timing matters: a programme that is ramping up production is a better target than one finishing its run.

Read what the primes publish

Primes tell suppliers a good deal about what they want, if you know where to look.

  • BAE Systems publishes areas of interest for SME enquiries. Under its marine electrical equipment heading (reference 1105) it lists electrical equipment racks, electrical equipment housing and cable assemblies; “Common computing” (1060) includes racks and enclosures; and reference 1112 covers electrical components and cables. BAE notes that submitting an enquiry “in no way represents any form of supplier approval or registration”.
  • Thales UK lists Electronics among the categories it buys. Its supplier brochure (version 7.0, December 2025) makes a cyber security accreditation such as Cyber Essentials, Cyber Essentials Plus or ISO 27001 mandatory, along with ISO 9001 and/or AS9100 for aerospace work, signing its integrity and corporate responsibility charter, and an up-to-date business continuity plan. JOSCAR membership is listed as desirable.
  • Leonardo UK says it spends about £1bn a year with nearly 1,700 UK suppliers, 75% of them SMEs. It requires AS9100 for aircraft components, NADCAP accreditation for special processes, and expects its suppliers to engage with the SC21 improvement programme. Its UK Electronics business is a founding member of JOSCAR.

The pattern is consistent: a recognised quality system, cyber certification, a shared supplier registration, and evidence of continuous improvement.

Work out who actually places the order

Public contract notices show how the category is bought, and they are sobering for anyone hoping to win through open tenders.

  • A competed requirement. In 2025 Dstl ran a competitive flexible procedure for equipment cabinets holding custom electronic enclosures, built to DEFSTAN 08-107 Issue 3 and tested for EMC and environment to DEFSTAN 59-411 and 08-123. It was awarded to Steatite Limited for £1,649,818 excluding VAT, signed on 16 September 2025.
  • A direct award to a design holder. A five-year contract for pressure hull penetrators and associated cables and connectors, worth £18.2m excluding VAT, was awarded directly to AMETEK SCP on the grounds of a single supplier for technical reasons (notice published 28 April 2026).
  • Another direct award. In September 2026 MOD bought six cable assemblies, built to a cable-assembly drawing for the TAIPAN weapon-locating radar, directly from General Dynamics UK for £14,818.08 excluding VAT.

The lesson for a new supplier is clear. Where the design sits with an integrator or an original manufacturer, that company decides who makes the parts. Your route is to become a qualified source for them, not to wait for MOD to advertise.

Incumbents exist too. TT Electronics supplies Boxer cable assemblies to RBSL, and in July 2025 announced a contract to make military-grade cable harness assemblies for Ultra PCS, a customer of more than 35 years. A credible approach acknowledges that and offers something an incumbent may not: a second source, help with obsolescence, spare capacity or shorter lead times.

Build the evidence a category buyer checks

Before a buyer will spend time qualifying you, expect to evidence:

  1. Quality. ISO 9001 as a baseline; AS9100 for aircraft work; NADCAP for special processes where they apply.
  2. Workmanship and traceability. For harnesses and cable assemblies, recognised workmanship standards (IPC/WHMA-A-620 is widely used in the industry), first article inspection records and part traceability.
  3. Cyber. Cyber Essentials as a minimum. MOD’s Def Stan 05-138 Issue 4 lists it at every cyber risk level, and Cyber Essentials Plus at the two highest, and primes apply similar requirements down their supply chains.
  4. Registration. Each prime’s own supplier route, plus JOSCAR where the buyer uses it.
  5. Test and qualification data. Environmental, EMC and ingress test evidence for the products you would supply, against the standards the platform uses.
  6. Capacity and references. Delivery performance and references from demanding customers in aerospace, rail, energy or industrial markets.

Approach in the right order

  1. Shortlist the sites. Pick the programmes and UK sites where your category is bought and volume is rising. Ten well-chosen sites beat a hundred names.
  2. Register. Complete the supplier route for each priority company and the shared registers they use.
  3. Find the category owner. Identify, by role, the buyer for electrical and electronic commodities, the supplier quality team and the programme’s supply-chain lead at that site.
  4. Send something specific. A short capability note tied to their platform: what you make, the standards you build to, the customers you deliver for, and the problem you can solve for them.
  5. Meet them where they buy. Meet-the-buyer events run by trade associations, and supplier days run by primes, are useful second touches.
  6. Follow up with evidence, for months. Supplier qualification takes time. Keep the conversation going with test data, sample parts or a small first order.

Mistakes to avoid

  • A generic “we can do defence” brochure. It tells a buyer nothing about their platform.
  • Approaching MOD for parts an integrator controls. You will be in the wrong conversation.
  • Overclaiming. Never imply certifications, approvals or experience you do not hold. A buyer will check.
  • Asking for influence. Introductions are legitimate; anything that looks like an attempt to influence a procurement decision is not.

See the method worked through

Our sample account map applies this method to a hypothetical cable, harness and enclosure supplier, using public sources only. The Defence Entry Assessment produces the same map for your own company, with named contacts and a 90-day plan. Or discuss your defence growth plan first.

Frequently asked

Questions

What is a defence prime contractor?

A prime contractor, or prime, is the company that holds the main contract with the Ministry of Defence for a complete platform, system or service and answers to MOD for delivering it. It buys much of the content from its supply chain: tier-one suppliers sit directly beneath it and buy in turn from lower tiers. The same company can be a prime on one programme and a supplier on another.

Who are the UK's largest defence suppliers?

MOD's own statistics for 2025/26 show ten companies received 40% of its procurement spending: BAE Systems (just over £7.3bn, 16.5%), Babcock, Rolls-Royce, QinetiQ, Airbus, Leonardo, Thales, Serco, Leidos and Boeing. Not all of them build platforms; Leidos and Serco mainly provide services. Spending with MBDA UK, the missile maker, is counted within the figures for its owners, BAE Systems, Airbus and Leonardo.

Should a component supplier approach MOD or the prime?

Usually the prime, integrator or tier-one supplier. They choose who supplies the parts inside their equipment, and recent MOD notices show cable assemblies being bought directly from the company that holds the design. Approach MOD directly when you sell a finished item it buys in its own right.

Who should we contact inside a prime?

The people who own your category at the site that builds the platform: typically a category or commodity buyer for electrical and electronic parts, the supplier quality team who would qualify you, and the programme's supply-chain lead. Use each company's supplier route alongside a targeted approach; the two work together.

What opening offer is credible for a new supplier?

One that solves a buyer's problem without asking them to take a risk: a second source for a category with a single supplier, help with obsolete parts, spare capacity, or shorter lead times. Asking a buyer to replace a qualified incumbent straight away is rarely the right first message.

Start the conversation

Discuss your defence growth plan

Tell us what you make and what you want from defence. We will give you a straight view on where you could fit, which buyers matter and what a credible route looks like.